Rear brake lights

The rear brake lights on the hatch(tailgate, back door) have one bolt. Once the bolt has been removed the light assembly has to be pried off. This thing is on REALLY good. There are at least 3 metal studs with threads on the frame of the hatch that go into plastic holes in the light assembly. A long screw driver did not work and I had to resort to a long crowbar. Do not pry around the outer edge of the light where there is paint. You can easily dent and scratch the metal even with using a cloth. Slide the crowbar where the nut was removed and start working it underneath the assembly. Work one stud at a time. After the bulb was replaced, I could not get the light assembly back on tight, but close.